Results 1 to 3 of 3

Thread: Overheating of cartridges

  1. #1
    S 8 Booster
    Guest S 8 Booster's Avatar

    Post

    Hi, from my own experience I thik that the most important factor is to get the films developed asap after exposure.

    I have some bad results on a S8 that was exposed and mistakingly stored in a area that was well over normal room temperature for 2-3 years and then developed.

    That came outbad. Red/magenta toning all the way, most of it were at the side that were closest to the heat source.



    ------------------
    Vidar

  2. #2
    Scottness
    Guest Scottness's Avatar

    Post

    Thanks Vidar - good advice

    Scot




    ------------------

  3. #3
    Scottness
    Guest Scottness's Avatar

    Post

    Just did a bit of filming and found that we had some cartridges that were left in the sun for probably about 45 mins -- it was 32C (about 90 faranheit)- some were exposed and some weren't -- what can I expect when they were developed -- they were all in their boxes which may have shielded them a bit --- there was also an SLR still camera with about 15 shots exposed in it - and it was too hot to pick up -- any hope for that film?? .. the kind of msitake you only make once --- anyway in a rush - any advice on what to expect would be good

    thanks

    Scot M

    ------------------

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •